![]() ![]() If you find it, you're good to go if not, try going through the steps again and double-checking the manual. You may have to adjust your view in Stellarium in order to find the reticle. ![]() Stellarium view following successful connection. You will know that the setup was successful if you see the orange telescope reticle appear in Stellarium:įigure 2. Credit: authorĪt this point you should be connected with Stellarium. (4) Finally, click the box next to 'Connect'.įigure 1. This automatically selects the settings that enable StellariumScope to "talk" with Stellarium. (3) Next, choose 'Update Stellarium Configuration' and follow the prompts. This is a good way to get a feel for the settings. (2) For the purposes of this demonstration, I will be choosing the 'Simulator'. ![]() If ASCOM is properly installed, you should see a new menu of your available telescopes. (1) Fire up StellariumScope and choose 'Select mount' near the top left of the window. You will have to run Stellarium at least one time before proceeding to the next step. The telescope will have to be properly aligned before you can successfully aim it with any third-party software. ![]() Here is a brief synopsis: First, connect your telescope's mount to your computer (not necessary if you just want to try the simulator). Ok, now that you have all of your software installed and updated, it's time to connect the telescope.ĭetailed instructions for this process can be found in the StellariumScope manual located in the Help Menu. This can be done under Configuration window - Tools tab. It comes with a base package of the brighter stars, but adding the additional catalogs really improves the accuracy of what you see in Stellarium compared with what see in your images. If you're going to be doing a lot of imaging with your telescope, another tip is that you should update all the star catalogs in Stellarium. This third party application acts as a server and extends the number of devices that can be controlled by Stellarium. Although it is possible to directly control your telescope with Stellarium, I highly recommended also installing StellariumScope. This guide will assume that you have a computerized GOTO mount that is compatible, have already downloaded and installed Stellarium, and that you have the appropriate ASCOM drivers that make all this different software compatible. There is also plenty of documentation on this topic, but sometimes it can be confusing and I personally find it helpful to be able to follow a worked example. There is lots of documentation on the internet about the basic use of Stellarium (start with their wiki), so this post will focus primarily on the aspect of telescope control. However, the "All-Sky" planetarium view in Maxim DL is pretty paltry so that's why I opt to couple it with Stellarium for a more visually intuitive interface. Maxim DL is the swiss army knife of telescope imaging software because it allows for control of the telescope, camera, dome, filters, focuser, etc. (I have switched to using the open source INDI Library for controlling my remote observatory). I have used Stellarium in conjunction with Maxim DL to control my photometry sessions with TECMO. This is a free open source planetarium for your computer that is highly customizable. Although there are many planetarium software choices available that range from super fancy (and expensive!) to bare bones, my favorite is Stellarium. Planetarium software is particularly cool because it enables you to simply click objects to direct your telescope to point at them. One of the most awesome features of modern amateur telescopes is that they can connect with a computer to allow control by a wide assortment of software. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |